MUW-Mini
Ultrasonic Level Monitor
The MUW-2000, an ultrasonic level monitor, is a small
but high-cost performance level monitor in use
of ultra sound. It has a compact and clean body
made of polypropylene. It is suitable for level
management of pure water and/or chemical substances.
4 to 20 mA DC current output, two alarm output
for high and low level detection as well as RS232C
output for maintenance are standard outputs. MUW-2000
enables you simple and easy level monitoring and
controlling.
Standard
Specifications
| Measuring Range |
MUW-2100 |
MUW-2200 |
| Max |
4.0 m |
9.99 m |
| Blocking distance |
0.25 m |
0.50 m |
| Ultrasonic frequency |
100 kHz |
50 kHz |
| Beam angle |
7° (Half angle) |
| Indication (Inside cover) |
| Level Indication |
3-digit LED indication (Character height
8mm, red) |
| Indication unit |
cm |
| Parameter indication |
change with key - switches |
| Measuring Accuracy
|
| Indication Accuracy |
±0.25% of max. measuring
range or 1 cm (whichever is larger) |
| Setting (free setting with key - switches
inside the body) |
High and low alarm level
Current Output level range
Number of sampling data
Other display units selectable |
| Output Function |
| Level signal |
4 to 20 mA DC/isolated |
| Max. load resistance |
500 ohms |
| Resolution |
±0.1 mA |
| High & Low alarm output |
Open collector NPN |
| Load |
30Vdc/0.1A Max. |
| RS232 output Communication speed |
9600 bps |
| Resolution |
1 mm |
| Supply Voltage |
10.2 to 27.6Vdc |
| Power Consumption |
approx. 3W |
| Ambient Temperature |
-20° to +60°C |
| Pressure |
atmosphere |
| Storage temperature |
-30° to +80°C |
| Material |
Body:
PP(Polypropylene)
Membrane: PP(Polypropylene)
O-ring:
Fluorine(rubber) |
| Installation |
Thread: G2 thread |
| Enclosure |
IP65 |
| Memory back up |
EEPROM (for set parameters) |
| Mass |
approx. 350 g (w/out cable) |
| Cable |
10 m / Water proof connector type
0.3 mm2 x 8C with screen / Diameter: approx.
6mm |
Product Data Sheet
|
