“Flow Through”
Pressure Transducer
The MSE-3300 is a “flow through” pressure
transducer suitable for use in monitoring pressure
of various high-purity and corrosive/aggressive
fluids. The “flow through” design
provides for minimal “dead volume”
which reduces the potential for contamination
of the measured fluid/process. The heart of the
MSE-3300 is a uniquely designed all PFA diaphragm/nano
-composite ceramic sensor. The product’s
“balloon shaped” PFA pressure structure
eliminates the need for any o-ring seals, thus
insuring the ultimate in purity for your process.
The proprietary technique of bonding of this PFA
to the ceramic sensor insures accurate and highly
reliable operation. The MSE-3300 is available
in several ranges and can measure pressure to
150 psig. The product incorporates integral temperature
compensating sensor electronics, further enhancing
the product’s features and performance.
Features
• 1% full-scale accuracy
• Capable of measuring gauge and vacuum
pressure
• All PFA wetted part construction
• No o-ring seals
• Flow-through design insures minimal “dead
volume”
• Integral temperature compensation circuitry
• Built-in leak indicator
• Choice of end fittings: tube, flare, NPT
or Pillar
• CE Compliant
Applications
• High-purity DI water and aggressive chemical
monitoring
• Filtration condition monitoring
• General pressure monitoring
Standard
Specifications
| Measurement Range |
0(-14.7) to 150
psi (Gauge, Compound Pressure) |
| Maximum Allowable Over Pressure |
0 to 50 psig - 110 psig, 0 to
75 psig - 110 psig, 0 to 150 psig - 180 psig |
| Accuracy* |
± 1% F.S (std 25°C) |
| Output Signal |
4-20 mA |
1-5Vdc, 0-5Vdc, 0-10Vdc |
| Supply Voltage |
24Vdc |
15-24Vdc |
| Operating Temperature |
0° to 80°C / (32°
to 176°F) |
| Compensated Temperature |
15° to 40°C / (59°
to 104°F) |
| Thermal Effect |
±0.5% FS/°C (15°
to 40°C) |
| Process Connection - Sizes |
1/4", 3/8", 1/2",
3/4" |
| Process Connection - Types |
Tube, Flared, PT, NPT, Super
Pillar |
| Enclosure Protection |
Ip 55 Compatible |
| Construction Materials |
Diaphragm, Wetted part - PFA,
Electrical enclosure - Polypropylene |
* Linearity, Repeatability, Hysteresis
Product Data Sheet
|
