Pressure Transducer for all Chemistries
The KL-92 is a pressure transducer suitable for use in monitoring
pressure of various high-purity and corrosive/ aggressive fluids.
The superior design provides for minimal “dead volume” which
reduces the potential for contamination of the measured fluid /
process. The KL-92 is available in two construction types: inline or
insertion. The body construction meets IP-54 requirements.
Features
• ± 1 % full-scale accuracy
• All PFA/PTFE wetted part construction
• No 'O'-ring seals or fill fluids
• Choice of end fitting: Flare, Pillar, 20S, MNPT, or Tube
Applications
• High-purity DI water, slurry, and aggressive chemical
monitoring
• Filtration condition monitoring
• General pressure monitoring
Standard
Specifications
| Measurement Range |
0 to 75 psig |
| Maximum Allowable Over Pressure |
120 psi |
| Accuracy* |
± 1% F.S |
| Output Signal |
0-10VDC |
4-20mA, 1-5 VDC, 0-5VDC |
| Supply Voltage |
24VDC |
15-24VDC |
| Operating Temperature |
10° to 80°C / (50°
to 176°F) |
| Applications |
High-purity DI water, slurry, and aggressive chemical
monitoring |
| Process Connection - Sizes |
1/4", 3/8", 1/2", 3/4" |
| Process Connection - Types |
Flaretek, Super Pillar 300, Tube ends, MNPT |
| Enclosure Protection |
IP-54 (Splash Proof) |
| Construction Materials |
Wetted parts - PFA/PTFE |
Product Data Sheet
|
