“Flow Through” Pressure Transducer w/ Onboard Display
The KL95 is a “flow through” pressure transducer suitable for use in monitoring pressure of various high-purity and corrosive/aggressive fluids. The “flow through” design provides for minimal “dead volume” which reduces the potential for contamination of the measured fluid/process. The KL95 is provided with an integrally mounted local LED display and is available in two standard pressure ranges.


Features
• 1% full-scale accuracy
• Local LED Display
• Capable of measuring gauge pressure
• All PFA wetted part construction
• No o-ring seals or fluids fill
• Choice of end fittings: tube, flare, or Pillar

Applications
• High-purity DI water and aggressive chemical monitoring
• Filtration condition monitoring
• General pressure monitoring

Standard Specifications

Measurement Range	0 to 75 psi (Gauge Pressure)
Maximum Allowable Over Pressure	105 psig
Accuracy*	± 1% F.S ± 1 digit
Output Signal	0-10Vdc	4-20mA, 1-5 Vdc, 0-5Vdc
Supply Voltage	24Vdc	15-24Vdc
Operating Temperature	10° to 60°C / (50° to 140°F)
Applications	Chemicals (acid, alkali, solvent), Ultra pure water*
Process Connection - Sizes	1/4", 3/8", 1/2", 3/4"
Process Connection - Types	Tube, Flared, Super Pillar
Enclosure Protection	Ip 54 Compatible
Construction Materials	Wetted parts - PFA/PTFE, Display Case - Polypropylene

* Media should be compatible with PFA

Product Data Sheet