Industrial manufactures require fluid handling systems that are economical and ensure the protection of the environment, while improving production processes. There is no single solution to meeting these challenges. Malema’s expertise and experience with fluid handling and control will help you to create a custom solution for your process.
Experienced in sensors, electronics, and process instrumentation, Malema incorporates groundbreaking state of the art technologies into every instrument.
“Flow Through” Pressure Transducer w/ Onboard Display
The KL95 is a “flow through” pressure transducer suitable for use in monitoring pressure of various high-purity and corrosive/aggressive fluids. The “flow through” design provides for minimal “dead volume” which reduces the potential for contamination of the measured fluid/process. The KL95 is provided with an integrally mounted local LED display and is available in two standard pressure ranges.
The MFS-25 series of Paddle Flow Switches that are ideally suited in process applications where direction of flow and desired actuation set points are needed for control and dynamics of operations. Suitable for installation in pipes 1" to 8" and rated to 1500 psi max.
The CMFC-5000 Integrated and Compact Coriolis Flow Controller controls liquid and Slurry flows up to 5000 grams per minute to within 1.5% accuracy of the set point, while providing a quick response time of within 2 seconds for consistent control. Mass flow measurement is fluid independent.
The LFC-7000 Series high-performance closed-loop flow controllers are designed for use in a wide variety of liquids including DI water, harsh chemicals, and CMP polishing slurries.
The CMFC-9000 Integrated Coriolis Flow Controller controls liquid and Slurry flows up to 3000 grams per minute to within 1.0% accuracy of the set point, while providing a quick response time of within 2 seconds for consistent control. Mass flow measurement is fluid independent.
The CPFM-8800 Series is a family of advanced Coriolis flow meters fabricated exclusively from PFA polymeric material for measuring liquids in high-purity semiconductor, biopharm and other applications that require all-PFA wetted surfaces and provide a Mass Flow Rate, Total Mass and Temperature output with accuracy ±1% of reading.
The VF-8100 consists of an inline flow sensor and electronics in one package. The flow sensor is a straight-through PFA tube that uses ultrasonic sensing technology to measure the flow rate. There are no moving parts or mechanical seals. The VF-8100 is an ideal choice for use in the semiconductor industry where minimal footprint, high purity and corrosion resistant wetted parts are required.
The Flowmate series oval gear flow meters are designed for monitoring fuel consumption of combustion appliances and heaters or applications when low flow measurement is required. They are also suitable for a variety of liquid flow applications including high viscosity fluids.